NSK RHP N1006JC3 – 30 × 55 × 13 mm
Single row cylindrical roller bearing N1006JC3, dimensions 30 × 55 × 13 mm, with C3 internal clearance. Open N-type design with a separable outer ring for radial load transmission. Allows axial displacement between rings in both directions.



N1006JC3 is a single-row cylindrical roller bearing of the N10 dimension series designed for radially loaded bearings with limited installation space. It has an inner diameter of 30 mm, an outer diameter of 55 mm and a width of 13 mm.
The N-type design features two guiding flanges on the inner ring and an outer ring without flanges. This allows axial displacement between the rings in both directions, for example, in the case of thermal expansion of the shaft. The separable outer ring facilitates easy mounting and dismounting.
The C3 design denotes a radial internal clearance that is greater than normal. It is used in bearings where it is necessary to account for a reduction in clearance due to mounting interference fits or differing operating temperatures of the rings.
The bearing is open, without seals or shields. Requires appropriate lubrication and protection against contaminants within the equipment design.
Technical Parameters
- Manufacturer / brand: NSK / RHP
- Designation: N1006JC3
- Type: single row cylindrical roller bearing
- Dimension series: N10
- Inner diameter: 30 mm
- Outer diameter: 55 mm
- Width: 13 mm
- Radial internal clearance: C3 – greater than normal
- Cage: pressed steel, designation J according to the RHP system
- Seals and shielding: without seals, open design
- Inner ring: with two guiding flanges
- Outer ring: without flanges, separable
- Load direction: radial
- Axial displacement between rings: possible in both directions
Applications
For radially loaded bearings in gearboxes, drive units and other industrial equipment with limited installation space. Suitable for floating bearings allowing for thermal expansion of the shaft, provided the equipment design specifies an N-type bearing with increased C3 clearance.
Additional parameters
| Category: | Industrial Bearings FAG, INA, SKF, NSK |
|---|---|
| Warranty: | 1 year |
| Weight: | 0.2 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
